5
ENGLISH
Setting the clock to summer/winter
time
– Plug the unit into the mains.
– Press and hold the «DST» button (5)
until the time digits change.
Alarm setup (
AL.1 and AL. 2).
– To view the settings of the first alarm
in the current time mode press the
«AL.1» button (15).
– In the alarm settings of view mode,
press again and hold the «AL.1»
button (15). The hour digits will start
flashing on the display.
– Use the buttons (3) and (5) to select
the necessary hour.
– Press the «AL.1» button (15). The
minute digits will start flashing on
the display.
– Use the buttons (3) and (5) to select
the necessary minutes.
– Press the «AL.1»
button (15)
.
Flashing symbols of alarm signal
repeating modes will appear on the
display. Use the buttons (3) and (5)
to select the necessary mode:
– 1-1 without repeat,
– 1-5 alarm signal repeating from
Monday to Friday,
– 1-7 alarm signal repeating seven
days a week,
– 6-7 alarm signal repeating on
Saturday and Sunday.
– Press the «AL.1»
button (15)
.
If you
set the alarm signal without repeat
(1-1), the alarm day digits will
appear on the display. Using buttons
(3) and (5) set the alarm day (1 -
Monday, 2 - Tuesday etc.).
– Press the «AL.1»
button (15)
.
The
alarm signal symbols will start
flashing on the display. Use the
buttons (3) and (5) to select the
necessary alarm signal: sound
signal (symbol «bu») or radio (tuned
station frequency appears).
– If you selected radio as alarm signal,
press the «AL.1» button (15), the
alarm volume level symbol will start
flashing on the display (from 1 to
15). Using the buttons (3) and (5)
select the desired alarm volume
level.
Note
: If you want to select the radio
as an alarm signal, preliminary tune
the required radio station (see “Radio
stations reception”).
– To finish the setting of the first alarm,
press the «AL.1»
button (15)
.
– Repeat the described steps for the
second alarm (14) «AL.2».
Note:
• If buttons (3) and (5) are not being
pressed within 30 seconds, the unit
will be switched to the current time
mode.
• Alarm operation is only possible
when the unit is connected to the
mains.
Switching the alarm on/off
– To switch the alarm (alarms) on in
the current time mode press and
hold the «AL.1» button (15) and/
or the «AL.2» button (14) until the
indicators (10)
1
and/or (12)
2
respectively appear on the display.
– To switch the alarm (alarms) off in the
current time mode press and hold
the corresponding button again.
Indicator of the corresponding alarm
will switch off.
Alarm snooze
– You can switch off the alarm signal
for 9 minutes by pressing the
“SNOOZE/SLEEP” button (4).
The
indicator of the selected alarm will
flash; alarm signal will be repeated
in 9 minutes.
– To switch the alarm sound signal off
press the button (7) «
».
Note:
The alarm/radio signal will sound
for 30 minutes if you do not press any
buttons.
Display brightness setup
Set up the necessary display brightness
by pressing the button (4) “DIMMER”
repeatedly in the current time mode.
Sequential displaying mode
You can switch sequential displaying
function for current time, year and
current date.
VT-3524_IM.indd 5
17.01.2013 13:37:37