ENGLISH
5
Always close the disc compartment lid to prevent
dust getting into it. Always take out the disc from the
compartment, if it is not being played.
1. Switch on the unit.
2. Select the CD discs playback mode. Set the
FUNCTION
switch to
CD/ MP3
.
3. Open the disc compartment. Insert a disc and
close the compartment lid. Make sure that the
disc is inserted properly – the label upwards.
4. The “---” symbol will appear on the LCD-display
for several seconds, and then number of the
tracks will appear on the LCD-display.
5. To start the playback, press the
PLAY/PAUSE
button.
Playback
In the playback mode press the
PLAY/PAUSE
but-
ton, the playback of the disc will start.
Pause
To pause the playback, press the
PLAY/PAUSE
button in the playback mode.
To resume the playback press the
PLAY/PAUSE
button once again.
Stop
To stop playback, press the
STOP
button. The
number of the tracks will appear on the LCD-dis-
play.
Moving to the beginning of the track, to the next
and to the previous disc
1. To move to the next/previous track, press the
/
buttons once.
2. To quickly move to the necessary part of the
played track, press and hold the
/
buttons
correspondingly.
Selecting album
You can select the necessary album, pressing the
button.
Note
: After all the tracks on the disc are played, the
unit will stop the playback automatically.
Repeat playback of a disk or a track
1. To repeat one track, press
MODE/PROG
once,
“REP” will appear on the LCD-display.
2. To repeat one album, press the
MODE/PROG
button twice, “ALBUM” will be flashing on the
LCD-display.
3. To repeat all tracks on the disc, press the
MODE/
PROG
button thrice, “REP ALL” will appear on
the LCD-display.
Random playback
1. To playback all tracks on the disc in a random
order, press the
MODE
button four times in the
stop mode, “RANDOM” will appear on the LCD-
display. Press the
PLAY/PAUSE
button, random
playback of the tracks will start.
2. To cancel random playback, press the
MODE
button once again, “RANDOM” will disappear
from the LCD-display.
PROGRAMMING THE PLAYBACK
You can program playback of tracks in the desired
order.
1. When the playback is stopped, press the
PROG
button once. The number of the track while pro-
gramming “P01” will be flashing on the LCD-dis-
play
2. Select the desired track, consequently pressing
the
/
buttons.
You can select the necessary album or move 10
tracks forward by pressing the
10+/
button.
3. To store the selected track, press the
MODE/
PROG
button once again. The number of the
track will change to “Р02”».
4. Programming of the following track: select the
next track, consequently pressing the
/
but-
tons. Then press
MODE/PROG
to store the de-
sired track in memory.
5. To playback the programmed tracks, press the
PLAY/PAUSE
button.
6. To cancel the programmed playback, press the
STOP
button twice or open the disc compart-
ment lid, or set the
FUNCTION
switch to another
position.
7. After all the programmed tracks are played; the
unit will stop the playback automatically.
When the list of 20 stored tracks is full, “---” will be
flashing on the display for several seconds.
During the programmed playback to repeat one
track press the
MODE/PROG
button, the “REP”
symbol will be flashing on the LCD-display, to repeat
all tracks on the disc press the
MODE/PROG
button
once again, the “REP ALL” symbol will be flashing on
the LCD-display.
To stop the repeated playback, press the STOP
but-
ton.
TROUBLESHOOTING GUIDE
Improper usage is always the case of trouble. If you
consider that there is something wrong with the unit,
check possible causes in this table.
If you have not managed to solve the problem, apply
to the nearest authorized service center.
3467IM.indd 5
3467IM.indd 5
19.08.2010 14:26:27
19.08.2010 14:26:27
Downloaded From Disc-Player.com Vitek Manuals
