Vitek VT-3409, Инструкция по эксплуатации, Страница: 10 / 36

10
ENGLISH
BLENDER SET VT-3409
The blender is included into the blender set
and intended for whisking, mixing, chopping
and combined processing of liquid and solid
products.
DESCRIPTION
1.
Detachable blender attachment
2.
Motor unit
3.
On button
4.
Attachment installation place
5.
Chopper geared lid
6.
Chopper bowl
7.
Chopping knife
8.
Whisk attachment gear
9.
Whisk attachment
10.
Cup
ATTENTION!
For additional protection it is reasonable to
install a residual current device (RCD) with
nominal operation current not exceeding
30 mA. To install an RCD contact a specialist.
SAFETY PRECAUTIONS
Before using the blender set, read this instruc-
tion carefully. Keep these instructions for further
reference. Use the blender set for its intended
purpose only as specified in this manual.
Mishandling the unit may lead to its breakage
and cause harm to the user or damage to his/
her property.
• Before connecting the unit to the mains, make
sure that the voltage specified on the unit cor-
responds to your home mains voltage.
• Do not use the unit outdoors.
• Do not use the unit near hot surfaces (such
as gas or electric stove, oven).
• Provide that the power cord does not touch
sharp edges of furniture and hot surfaces.
•
Do not touch the motor unit body, the power
cord and the plug with wet hands.
•
To avoid risk of electric shock or fire, do
not immerse the unit body, the power cord
and the power plug into water or any other
liquids.
• If the unit is dropped into water:
–
do not touch the water;
–
unplug the unit immediately, only after
that you may take the unit out of water;
–
apply to an authorized service center for
testing or repairing the unit.
•
Before using the unit for the first time, thor-
oughly wash all the removable attachments
and containers that will contact food.
•
Use only the attachments supplied with the
unit.
• Before using the unit, make sure that the
attachments are set and fixed properly.
• It is not allowed to switch the unit on without
attachments and foodstuffs for processing.
•
Never leave the unit connected to the mains
unattended.
•
Always unplug the unit before changing the
attachments and after using it.
• Place the chopper bowl on a flat stable sur-
face.
• Put the products into the chopper bowl
before the unit is switched on.
•
Cool down hot products before putting them
into the measuring cup or the chopper bowl.
• Do not overfill the chopper bowl with prod-
ucts and watch the level of poured liquids.
• If rotation of the knife is hindered during the
operation of the chopper, unplug the unit
and carefully remove foodstuffs that prevent
the knife rotation.
•
Remove products and pour out liquids from
the chopper bowl only after complete stop
of the knife.
•
The cutting edges of the chopping knife and
of the blender attachment are very sharp
and dangerous. Handle these attachments
very carefully!
• Do not touch the rotating parts of the unit.
Do not let hair or free hanging clothes get
into the rotation area of the blender attach-
ment knife or whisk.
• To unplug the unit, do not pull the power
cord, instead take the power cord plug and
disconnect it from the mains.
•
Do not place the chopper bowl and the mea-
suring cup into a microwave oven.
• Do not put the attachments and the bowls in
a dishwashing machine.
• For children safety reasons do not leave
polyethylene bags used as a packaging
unattended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger
of suffocation!
• Close supervision is necessary when chil-
dren or people with disabilities are near the
operating unit.