7
ENGLISH
hairstyle lighter and accentuates the hair
texture. Due to thinning out the haircut
keeps its style for a long time. Hair thin-
ning means cutting off separate locks. It
allows achieving smooth transition between
locks of different length. Hair thinning is
performed at the final phase of hair cutting.
To extend the hair thinning comb, move
the lock (
4
) to the utmost right position.
To remove the hair thinning comb, move
the lock (
4
) to the utmost left position
(see
pic. 8
).
USING THE HAIR CLIPPER
–
For cordless use of the unit, charge the
battery fully following the recommenda-
tions above.
–
For the corded unit operation, insert the
power adapter (
12
) jack into the socket
(
1
) on the bottom part of the unit body
and connect the power adapter (
12
)
to the mains.
Hair cutting
–
The hair should be clean and dry.
–
Before cutting hair, switch the hair clip-
per on, setting the power switch (
3
) to
the position «
I
», the ON indicator (
2
) will
light up red.
–
Make sure that the hair clipper operates
normally and the blades move smoothly.
If there is excess oil on blades, remove it
with a dry cloth.
–
During operation with the unit connect-
ed to the power adapter, always check
the power cord condition, do not allow
its multiple twisting, periodically turn off
the unit and straighten the power cord.
–
Switch the unit off by setting the switch
(
3
) to the position «
O
», then install the
universal attachment (
8
) or (
9
).
–
Seat a person so that his/her head is
approximately at your eye level, cover
the person’s shoulders with a towel and
set hair with the comb.
–
Switch the unit on, setting the power
switch (
3
) to the position «
I
», the ON
indicator (
2
) will light up red.
–
After using set the power switch (
3
) to
the position «
O
», the ON indicator (
2
)
will go out.
Notes:
–
Always switch the hair clipper off during
breaks of operation cycles.
–
Before changing the attachment switch
the hair clipper off, and if the hair clip-
per is cord-operated, remove the power
adapter from the mains.
Reminders:
•
Cut off a little amount of hair at a time;
you can always return to the cut part for
additional cutting.
•
The best haircutting results are reached
on dry hair, not wet.
•
Comb the hair with a comb to reveal
uneven locks.
•
It is better to leave longer hair after cut-
ting for the first time.
•
After learning the unit better, you will
be able to arrange your hair in any style
you need.
HAIR STYLING INSTRUCTIONS
Step one
Set the universal attachment (
8
) to the
position «
3
» or «
6
». Switch the hair clip-
per on, setting the power switch (
3
) to the
position «
I
». Hold the hair clipper with the
blades pointed upwards. Start cutting from
the lower part of the head. Slowly move
the hair clipper upwards. Cut the head
back area at the bottom and near the ears
(
pic. 9, 10, 11
).
Step two
Switch the hair clipper off, set the attach-
ment to the position «
9
» or «
12
», switch
the hair clipper on and continue cut-
ting hair closer to the top of the head
(
pic. 12
).
IM VT-2567.indd 7
08.07.2016 17:08:43
