Vitek VT-2430, Инструкция по эксплуатации

Страница: 6 / 32

6
ENGLISH
Regular cleaning
– Wipe the steam station body and the iron with a slightly
damp cloth, and then wipe them dry.
– Remove the mineral deposit on the iron soleplate (1)
with a cloth soaked in vinegar-water solution and then
wipe the soleplate surface with a dry cloth.
– Do not use abrasive substances and any solvents to
clean the steam station body and the iron.
Self-clean mode
– Fill the water tank (13) with water and install it back to
its place.
– Place the iron on its base (8).
– Insert the power plug into the mains socket, you will
hear a sound signal and the button (15) light indica-
tor will light up.
– Switch the unit on by pressing and holding the but-
ton (2 or 15) for more than 2 seconds, you will hear a
sound signal and the button (2) indicator will light up
and start flashing.
– After the soleplate of the iron (1) heats up, the indicator
(2) on the iron starts glowing continuously.
– To switch the self-clean mode on, press and hold the
buttons (2) and (3) for 3-4 seconds, the self-clean
mode symbol (19) will light up.
– Position the iron horizontally over the sink, then press
and lock the steam supply key (3) in the pressed posi-
tion. To lock the button (3) in the pressed position,
press it and move the lock.
– In the self-clean mode the intense water supply is
switched on.
– Hot water with mineral deposits will be released from
the iron soleplate (1) openings.
– Slightly sway the iron back and forth, while the water
leaves the water tank (13).
– After the water tank (13) becomes empty, move the
steam supply button (3) lock backwards and release
the button.
Note: If you didn’t press the steam supply button (3) dur-
ing 10 minutes, the auto switch-off function will be on, you
will hear sound signals, the symbol (20) will be flashing and
the heating will be switched off automatically. To resume
operation, press the steam supply button (3).
– Place the iron on its base (6) and let it cool down com-
pletely.
– When the iron soleplate (1) cools down completely,
wipe it with a dry cloth.
– Make sure that the iron soleplate (1) is dry before set-
ting the iron on the rest (8).
– Switch the unit off by pressing and holding the but-
ton (2 or 15).
– Unplug the unit.
STORAGE
– Before you take the unit away for storage, make sure
that unit has cooled down completely.
– Drain the remaining water from the water tank (13).
– Clean the unit.
– Place the iron on the rest (8) and lock it by pressing the
button (10).
– Place the power cord and the steam hose (5) in the
cord storage (14).
– Keep the unit in a dry darkened and cool place out of
reach of children and disabled persons.
DELIVERY SET
Steam station – 1 pc.
Warranty certificate – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50-60 Hz
Rated input power: 2200 W
Maximum power consumption: 2400 W
Maximum steam generation capacity: up to 220 g/min
Pressure: 5.5 bar
Water tank capacity: 1.5 L
RECYCLING
For environment protection do not throw out the unit and the
batteries (if included), do not discard the unit and the batter-
ies with usual household waste after the service life expira-
tion; apply to specialized centers for further recycling.
The waste generated during the disposal of the unit is sub-
ject to mandatory collection and consequent disposal in
the prescribed manner.
For further information about recycling of this product
apply to a local municipal administration, a disposal service
or to the shop where you purchased this product.
The manufacturer preserves the right to change design,
structure and specifications not affecting general princi-
ples of the unit operation without a preliminary notification
due to which insignificant differences between the manual
and product may be observed. If the user reveals such dif-
ferences, please report them via e-mail info@vitek.ru for
receipt of an updated manual.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be obtained
from the dealer from whom the appliance was purchased.
The bill of sale or receipt must be produced when making
any claim under the terms of this guarantee.
This product conforms to the EMC Directive
2014/30/EU and to the Low Voltage Directive
2014/35/EU.