Vitek VT-2381, Инструкция по эксплуатации, Страница: 5 / 28

ENGLISH
5
corresponds to the unit operating
voltage.
USAGE
To get the best results, wash your hair
with shampoo, wipe it with a dry towel,
dry with a hairdryer and comb your hair.
After that you can start styling your hair.
•
Divide the hair into locks 4-5 cm
wide.
•
Insert the power plug into the mains
socket.
•
Select the necessary mode and
set the on/off/temperature control
button (2) to the required position.
The switch on indicator (3) will light
up. There are 3 temperature modes
total – 160/190/210 °C.
•
Put the unit on the safety stand (7)
on a flat heat-resistant surface and
let it heat up.
•
Take a hair lock with the free hand.
•
Press the clamp handle (4), place
the end of the lock on the operat-
ing surface (5) and move the clamp
down.
•
Wait for a while, then press the clamp
handle (4) and release the hair lock.
•
Repeat this procedure on the rest
of your hair.
Note:
– Do not touch the operating surface
during the unit operation.
–
During the first operation some for-
eign smell and a small amount of
smoke from the operating surface
is possible, this is normal.
– During breaks in operation, place
the unit on a flat heat-resistant sur-
face.
–
Do not comb your hair right after
styling, let it cool off. Divide big
locks into smaller ones care-
fully to make the hairstyle look
natural.
•
After you finish curling, switch the
unit off by setting the on/off button
(2) to the initial position, the indica-
tor (3) will go out.
•
Unplug the unit.
•
Put the unit on the safety stand (7)
and let it cool down completely.
AUTO SWITCH OFF
If the operating unit is not used during
1 hour, it will automatically switch off
after 60 minutes.
CLEANING AND CARE
•
Before cleaning unplug the unit and
let it cool down completely.
•
Do not immerse the unit, the power
cord and the power plug into water
or any other liquids.
•
Do not use detergents, abrasives,
and any solvents to clean the unit.
•
Clean the unit body with a soft,
slightly damp cloth and then wipe
it dry.
STORAGE
•
Let the unit cool down completely
and clean it before taking away for
storage.
•
Do not wind the power cord around
the unit body as this can damage
the cord.
•
For easy storage, there is a hanging
loop (8) you can store the unit on,
provided that in such position no
water will get on the unit.
•
Keep the unit in a dry cool place out
of reach of children and disabled
persons.