Vitek VT-2349 Скачать руководство пользователя страница 5

Страница: 5 / 36

ENGLISH

– To switch the air humidifier off, touch the but-

ton (13) again, all symbols on the display will
go out and the unit will switch to the standby
mode.

– Unplug the unit.
Notes:
– the humidity level readings may be slightly dif-

ferent from the readings of another hygrometer.

– the humidity level indications depend on the

room temperature.

– draughts or other air flows may significantly

affect the air humidity and temperature indica-
tions in the room.

OPERATION MODE CONTROL BUTTONS
On/off button (13)

– Touch the button (13) to switch the unit on and

touch the button (13) again to switch the unit off.

«Mist» release intensity button (14)

– Consequently pressing the button (14), you can

select 3 “mist” release intensity levels:
– low level,
– medium level,
– high level.

The selected “mist” release intensity level is shown
on the scale (20).

Relative humidity setting button (18)

Relative  humidity  is  the  ratio  of  the  mass  content
of water vapour in the air to the maximum possible
mass at the given temperature; relative humidity is
measured in percent and is indicated, for example,
as “45%”.
Atmosphere  air  always  contains  water  vapour,
percentage  of  which  depends  on  meteorological
conditions;  the  higher  the  temperature,  the  more
water vapour is contained in the air. When cold air is
heated up to comfort temperature in winter, relative
percentage of water vapour decreases, this is what
relative humidity is.
To  maintain  comfortable  room  conditions,  water
or  water  vapour  must  be  artificially  added  to
the  ambient  air  –  this  is  what  the  air  humidifier  is
necessary for.
Comfortable  relative  humidity  for  humans  is  “45-
65%”;  “40-55%”  for  preventive  and  medicinal
purposes;  for  furniture,  musical  instruments  and
libraries it is recommended to maintain relative air
humidity of “40-60%”.
–  Switch the air humidifier on and set the neces-

sary level of “mist” release intensity.

– Consequently pressing the button (18), select

the desired humidity level within the range from
40% to 90% with a step 5%. The digital symbols
(21) on the control panel display (5) will indi-

cate the humidity. After selecting the desired
humidity level wait a little, the unit will automati-
cally switch to the relative humidity maintaining
mode, and the

symbols «%RH» will be flash-

ing constantly

. The current relative humidity

value will appear on the display.

– When the desired relative humidity level is

reached, the “mist” release will be switched off,
when the relative humidity level decreases, the
“mist” release will switch on.

Humidity level control

– To control the selected humidity level, touch the

button (18) once, the selected humidity value
will be indicated on the digital display with flash-
ing symbols (21), and after a while the display
will automatically switch to the mode of display-
ing the relative air humidity.

Notes:
– flashing symbols «%RH» mean that the unit

is operating in the humidity level maintaining
mode.

UV lamp on/off button (15)

– Touch the button (15) to switch the UV lamp for

eliminating the bacteria in the air. When the UV
lamp is switched on, the symbol (23)

will

appear on the control panel display (5).

– To switch the UV lamp off touch the button (15)

again.

Low water level indication

– When the water tank (3) becomes empty, the low

water level icon (19)