Vitek VT-2312, Инструкция по эксплуатации

Страница: 5 / 44

5
ENGLISH
their safety or if they are not instructed by this person on
the usage of the unit.
•
Check the integrity of the power cord periodically.
•
If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or similar
qualified personnel to avoid danger.
•
Do not attempt to repair the unit. Do not disassemble the
unit by yourself, if any malfunction is detected or after it
was dropped, unplug the unit and apply to any autho-
rized service center at the contact addresses given in
the warranty certificate and on the website www.vitek.ru.
•
To avoid damages, transport the unit in the original
package only.
•
Keep the unit in a dry cool place away from children and
disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage under cold (winter)
conditions, it is necessary to keep it for at least 3 hours
at room temperature before switching on.
– Unpack the unit and remove any stickers that can pre-
vent unit operation.
– Check the unit for damages; in case of damages do not
use the unit.
– Before switching the unit on, make sure that your home
mains voltage corresponds to the unit operating voltage.
– The unit is intended for operation with AC system and
50 Hz frequency. The unit does not need any addi-
tional settings for operating with the required nominal
frequency.
USAGE
To get the best results, wash your hair with shampoo, wipe
it with a dry towel, dry with a hairdryer and comb your hair.
After that you can start styling your hair.
– Divide the hair into locks 4-5 cm wide.
– Put the unit on the safety stand (3) on a flat heat-resis-
tant surface.
– Insert the plug into the mains socket.