Vitek VT-1662 BK, Инструкция по эксплуатации

Страница: 9 / 20

9
ENGLISH
•
If the cavity is too dirty, you may use a soft detergent.
•
Do not use abrasives and metal brushes to clean inner and outer surfaces of the oven. Provide that
no water or detergent gets into the air and steam outlets located on the unit body and lid.
•
Do not use detergents based on ammonia.
•
Wipe the unit’s outer surface with a soft damp cloth.
•
Always keep the oven door clean. Provide that no crumbs and food remnants accumulate between
the door and the front panel of the oven as it prevents the door from normal closing.
•
Regularly remove dust and dirt from the ventilation openings on the oven body, which serve for
cooling air intake.
•
Regularly take out and clean the glass rotary bottom plate and the roller support, wipe the bottom
of the oven cavity.
•
Wash the glass bottom plate and the support in warm water with a neutral detergent. You can wash
these parts in a dishwashing machine.
•
Do not immerse the heated glass rotary bottom plate into cold water: the glass plate can splinter
due to extreme temperature difference.
TrouBles and TrouBleshooTinG
The oven causes interferences in the
reception of TV and radio signals During operation of the unit, interferences in the reception of TV and radio
signals can appear. The same interferences appear during operation
of small electrical appliances such as a mixer, a vacuum cleaner and a
hairdryer. It is normal.
Dim lighting Oven cavity lighting can be low when low microwave power level is
selected. It is normal.
Steam accumulation on the door,
hot air output from the ventilation
openings. During cooking, steam can come out from the products. Great amount
of steam comes out through the ventilation openings, but some part can
accumulate on the inner side of the door. It is normal.
The microwave oven is switched on
without food inside. Switching the unit on without food for several minutes does not cause its
damage. Always make sure that there are food products in the unit before
switching it on
Troubleshooting
failure Possible cause solution
The unit cannot be
switched on The power cord plug is not
properly inserted in the socket. Take the plug out of the mains socket. After 10
seconds, insert the plug into the socket again.
Malfunction of the socket Try to connect another unit to the same socket
There is no heating The door is not closed tightly Close the door tightly
During operation the
rotating glass plate
produces foreign
sounds The lower part of the oven cavity
or the roller support is dirty Clean the glass bottom plate, the roller support
and the bottom of the oven cavity
Technical specifications and characteristics
operation conditions:
Air temperature from +10° С to +35° С
Relative air humidity 35-80%
Atmospheric pressure 86-106 kPa (650 – 800 mm Hg)
Main specifications
Power supply: 220-240 V ~ 50 Hz
VT-1662.indd 9 12.12.2013 16:30:54