Vitek VT-1491, Инструкция по эксплуатации

Страница: 3 / 24

3
ENGLISH
MIXER VT-1491
The mixer is intended for mixing liquids, making
sauces and desserts (whipped cream, puddings,
cocktails, mayonnaise) and for kneading dough.
DESCRIPTION
1.
Attachment release button «EJECT»
2.
Operation mode switch «0, 1, 2, 3, 4, 5»
3.
Mixer
4.
Beating/mixing attachments (beaters)
5.
Dough hooks
SAFETY MEASURES
Before using the unit, read this manual carefully and
keep it for future reference.
Use the unit for intended purposes only, as speci-
fied in this manual. Mishandling of the unit may lead
to its breakage and cause harm to the user or dam-
age to property.
• Before switching the unit on, make sure that
voltage of the mains corresponds to unit oper-
ating voltage.
•
Before using the unit, examine the power cord
closely and make sure that it is not damaged. Do
not use the unit if you find any damage.
• Provide that the power cord does not contact
with hot surfaces and sharp furniture edges.
Avoid damaging the isolation of the power
cord.
• Do not use the unit near heat sources or open
flame.
• Use only the beaters and dough hooks supplied.
•
Before using the unit for the first time thoroughly
wash all the removable attachments.
•
Do not touch the rotating parts of the unit.
Do not let hair or free hanging clothes get
into the rotation area.
• Do not use the beaters and attachments for mix-
ing hard ingredients, such as hard butter or fro-
zen dough.
•
Before using the mixer, make sure that the
attachments are installed properly and fixed.
•
Do not use a beater and a dough hook at the
same time.
•
Before installing the attachments, make sure
that the power plug is not inserted into the mains
socket.
• Before connecting the mixer to the mains, make
sure that the operation mode switch is set to the
off position («0»).
•
Do not remove or install the attachments during
the unit operation.
•
Do not use the unit outdoors.
Maximal continuous operation time is no lon-
ger than 10 minutes; make at least a 10 minute
break before switching the unit on again.
•
After mixer operation, switch it off, pull the
power plug out of the mains socket and remove
the attachments.
• Do not immerse the unit body and base, the
power plug or the power cord into water or any
other liquids. If the unit is dropped into water,
unplug it immediately and only then take the unit
out of the water.
•
Do not touch the mixer body and base, the
power cord and the power plug with wet hands.
•
Do not block the ventilation openings on the unit
body; this may lead to the electric motor over-
heating.
• Never leave the plugged-in mixer unattended.
Always unplug the unit before cleaning or when
you are not using it.
•
Never pull the power cord when disconnecting
the unit from the mains, take the power plug and
carefully remove it from the mains socket.
• Clean the mixer regularly.
•
This unit is not intended for usage by children.
• Do not allow children to touch the unit body and
the power cord during mixer operation.
• Do not leave children unattended to avoid them
using the unit as a toy.
• Place the unit out of reach of children during
breaks in the mixer operation.
• The unit is not intended to be used by peo-
ple with physical, sensory or mental disabilities
(including children) or by persons lacking expe-
rience or knowledge if they are not under super-
vision of a person who is responsible for their
safety or if they are not instructed by this person
on the usage of the unit.
•
For children safety reasons do not leave poly-
ethylene bags, used as packaging, unattended.
Attention! Do not allow children to play with poly-
ethylene bags or packaging film.
Danger of suffocation!
• Periodically check the power cord and the plug
isolation for damages.
• Do not use the unit if the power cord or plug is
damaged, if the unit works improperly or after it
was dropped.
•
If the power cord is damaged, it should be
replaced by the manufacturer, a maintenance
service or similar qualified personnel to avoid
danger.
•
Do not attempt to repair the unit. Do not disas-
semble the unit by yourself, if any malfunction is
detected or after it was dropped, unplug the unit
and apply to any authorized service center at the
contact addresses given in the warranty certifi-
cate and on the website www.vitek.ru.
•
To avoid damages, transport the unit in original
package only.