3
ENGLISH
HAND BLENDER SET
Description
1.
Attachment rotation speed control (Min-Max)
2.
On/off button
3.
“TURBO” mode button
4.
Motor unit
5.
Motor unit holder
6.
Detachable blender attachment
7.
Non-slip base/Measuring cup lid
8.
Measuring cup
9.
Blender attachment protective cover
10.
Wall mount holder
11.
Chopper bowl
12.
Chopping knife
13.
Non-slip base/Chopper bowl lid
14.
Whisk gear
15.
Whisk for beating/mixing liquid products
16.
Geared lid
SAFETY MEASURES
Before using the unit, read these instructions
carefully. Keep these instructions for future ref-
erence.
•
Before using the unit for the first time, make
sure that electricity supply corresponds to
the voltage of current specified on the unit
body.
•
The blender set allows quick and effective
operation, but continuous operation time
should not exceed 1 minute while using
blender and whisk attachment and 20-30
seconds while chopping products in mini-
chopper. Make at least a two-minute interval
between operation cycles.
•
When using the blender attachment, cool
down hot products, maximal temperature of
products should not exceed 80°С.
•
Do not use the unit outdoors.
•
Use only the attachments supplied with the
unit.
•
Use the unit only for the intended purposes
as described in the instruction manual.
•
Before using the unit for the first time, wash
all the removable parts that will contact food
thoroughly.
•
Before using the unit, make sure that all the
parts are set properly.
•
Use the unit on the flat stable surface.
•
Food products should be put into the chop-
per bowl before switching on the unit.
•
Do not overfill the chopper bowl with prod-
ucts and watch the level of liquids.
•
The chopping knife blades are very sharp
and dangerous. Handle them very carefully!
•
If rotation of the chopping knife appears hin-
dered, unplug the unit and carefully remove
foods, that prevent blade rotation.
•
Remove food and pour out liquids from the
chopper bowl only after complete stop of
knife rotation.
•
Do not touch the rotating parts of the unit. Do
not allow hair or clothes edges get into rotat-
ing zone of blender blades.
•
Never leave the operating unit unattended.
•
Always unplug the unit before cleaning or if
you do not use it.
•
Do not use the unit near hot surfaces (gas or
electric stove, oven).
•
Provide that the power cord does not touch
sharp objects and hot surfaces.
•
Do not pull the power cord and do not twist it.
•
Do not touch the plug with wet hands.
•
Do not use the unit if the power cord is dam-
aged.
•
Do not try to repair the unit by yourself. If
there are any damages in the unit, apply to
the authorized service center.
•
In order to avoid risk of electric shock or fire,
do not immerse the unit into water or other
liquids. If the unit was dropped into water:
–
do not touch water;
–
unplug the unit immediately, only then
you can take the unit out of water;
–
apply to the authorized service center for
testing and repairing the unit.
•
Do not allow children to use the unit as a toy.
•
Close supervision is necessary when chil-
dren or disabled persons are near the oper-
ating unit.
•
This unit is not intended for usage by children
or disabled persons unless they are given all
the necessary instructions by a person who
is responsible for their safety on safety mea-
sures and information about danger that can
be caused by improper usage of the unit.
•
For children safety do not leave polyethylene
bags, used as a packaging, unattended.
Attention!
Do not allow children to play with
polyethylene bags and film.
Danger of suf-
focation!
VT-1479 IM.indd 3
25.05.2012 11:14:29
