5
ENGLISH
and for mixing liquid products. The recom-
mended speed operation modes are «3, 4, 5».
Notes:
–
Make sure that the hooks (1) and beat-
ers (2) are attached properly. The hook
and the beater are equipped with a gear
intended for rotating the bowl (4). Insert the
attachment with the gear into the socket
“
”.
–
Do not use a beater (2) and a hook (1)
simultaneously.
–
Do not block the ventilation openings on the
mixer body during the operation; this may
lead to the electric motor overheating.
–
Maximal continuous operation time is
no more than 4 minutes. Make at least a
10-20 minute break before switching the
unit on again.
Blender attachment (14)
Use the blender attachment (14) for making
fruit puree, baby food, sauces, mayonnaise,
for mixing various ingredients, making cocktails
and for processing fruit and vegetables con-
taining enough liquid.
–
Maximal continuous operation time
with the blender attachment should not
exceed 30 seconds. Make at least a
5-10 minute break before switching the
mixer on again.
Blender bowl (13)
The blender is intended for chopping prod-
ucts, mixing different ingredients or making
smoothies.
–
Maximal continuous operation time with
the blender bowl is no more than 1 min-
ute. Make at least a 10-20 minute break
before switching the mixer on again.
Chopper
The chopper is used to chop meat, cheese,
onion, herbs, garlic, carrots, walnuts, almonds,
prunes, vegetables and fruit.
ATTENTION!
–
Do not chop very hard products, such as ice
cubes, frozen products, nutmegs, coffee
beans, cereals etc.
–
When chopping products in the chopper
bowl the operation time should not exceed
30 seconds. Make at least a 5-10 min-
ute break before switching the mixer
on again.
USING THE MIXER
–
Before installing the hooks (1) or beaters
(2) make sure that the switch (5) is set to the
position «0» and the plug is not inserted into
the mains socket.
–
Press and hold down the button (10), lift the
support (9) and release the button (10).
–
Set the bowl (4) on the base (11).
–
Install the attachments (1) or the beaters (2)
into the sockets. Insert the hook or the beater
with the drive gear into the socket
«
»
. Make
sure that the attachments are fixed properly.
–
Press and hold down the button (10), lower
the support (9) and release the button (10).
–
Press and hold down the button (8), place
the mixer on the support (9) and release the
button (8). Make sure that the mixer body is
fixed properly on the support (9).
–
Put the necessary ingredients into the
bowl (4).
–
When adding products to the bowl (4) make
sure that the attachments (1) or beaters (2)
contact with the products, in this way the
mixing is thorough.
–
Insert the power plug into the mains socket.
–
Switch the mixer on with the switch (5) set-
ting the attachment rotation speed from «1»
to «5» (see the table).
–
Do not hinder the rotation of the bowl (4)
during the unit operation.
–
After the unit operation is finished, set the
switch (5) to the position «0» and unplug
the unit.
–
Press and hold down the button (8), remove
the mixer from the support (9).
–
Hold the hooks (1) or the beaters (2)
with one hand, press the operation mode
switch (5) with your other hand and remove
the attachments.
–
Press and hold down the button (10), lift the
support (9) and release the button (10).
–
Remove the bowl (4) and take the products
out of it.
Note: You can use the unit as a handheld mixer;
for this install the hooks (1) or the beaters (2) and
use a suitable bowl or the measuring cup (15).
IM VT-1430.indd 5
13.12.2018 15:37:35
