background image

Safety Precaution

CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,
DO NOT REMOVE COVER (OR BACK). 
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To prevent electric shocks and risk of fire hazards, do NOT use other than 

specific power source.

 

Warning 

:

 

 

This equipment has been tested and found to comply with the limits for a Class

 A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

 to provide reasonable protection against harmful interference when the equipment

 is operated in a commercial environment. This equipment generates, uses, and 

 can radiate radio frequency energy and, if not installed and used in accordance with

 the instruction manual, may cause harmful interference to radio communications. 

 Operation of this equipment in a residential area is likely to cause harmful 

 interference in which case the user will be required to correct the interference at 

 his own expense.

 Caution 

 Any changes or modifications in construction of this device which are not expressly

 approved by the party responsible for compliance could void the user's authority 

 to operate the equipment.

 Mains power quality should be that of a typical commercial environment. If the user

 of the model requires continued operation during power mains interruptions, it is 

 recommended that the model be powered from an uninterruptible power supply 

 (UPS) or a battery.

The symbol is intended to alert the user to the presence of important        

operating and maintenance(servicing) instructions in the literature 

accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated

 "dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

2

LIMITED PRODUCT WARRANTY

VITEK products carry a three (3) year limited warranty. VITEK warrants 

to the purchaser that products manufactured by VITEK are free of any 

rightful claim of infringement or the like, and when used in the manner 

intended, will be free of defects in materials and workmanship for a 

period of three (3) years, or as otherwise stated above, from the date of 

purchase by the end user. This warranty is nontransferable and extends 

only to the original buyer or end user customer of a VITEK Authorized 

Reseller.

The product must have been used only for its intended purpose, and 

not been subjected to damage by misuse, willful or accidental damage, 

caused by excessive voltage or lightning.

The product must not have been tampered with in any way or the 

guarantee will be considered null and void.

This guarantee does not affect your statutory rights.

Contact your local VITEK Reseller should servicing become necessary.

VITEK makes no warranty or guarantee whatsoever with respect to 

products sold or purchased through unauthorized sales channels. 

Warranty support is available only if product is purchased through a 

VITEK Authorized Reseller.

Содержание Transcendent VTC-SMKC4

Страница 1: ...amera FEATURES 1 3 2 1 MegaPixel Progressive Scan CMOS 2 1 MegaPixel 1080p 720p HD TVI AHD CVI CVBS Selectable Video Output 1 Lux at F1 2 0 1 Lux B W 3 7mm Fixed lens Included Over 1500 HD Video Transmission Depending on cable characteristics and integrity 12VDC Operation ...

Страница 2: ...e model be powered from an uninterruptible power supply UPS or a battery The symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the unit The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitu...

Страница 3: ...TVI Video or AHD CVBS video connector to a BNC patch cable then to a DVR Next connect the power connector to a 12VDC power adaptor Installation 1 Disconnect power before installation 2 Confirm proper 12VDC power supply is used to prevent damage to the camera 3 Do not use in an environment beyond the boundaries of the specifications Video Output Mode Switch Select the desired video mode using the d...

Страница 4: ... Temperature Dimensions 1 3 2 1 MegaPixel Progressive Scan CMOS HD TVI AHD CVI 2 1 MegaPixel CVBS 960H 1920x1080 48dB or more Pinhole 3 7mm Fixed 1 Lux at F1 2 0 1 Lux B W Auto 1 30sec 1 60 000sec 3D DNR Auto ATW Over 1500 Depending on cable characteristics and integrity 12VDC 100mA 10 50 C 14 122 F Less Than 80 RH 5 12 x 2 29 130 x 58mm 28492 CONSTELLATION ROAD VALENCIA CA 91355 WWW VITEKCCTV COM...

Отзывы: