Vitek Transcendent VT-TTR SERIES, Руководство пользователя

Страница: 42 / 76

Transcendent DVR Series
41
② Set HTTP port. The default HTTP port is 80. If the value is changed, you shall add
the port number when typing IP address in IE address. E.g. If HTTP port is set to 82
and IP address is http://192.168.11.61, you should input http://192.168.0.61:82
into IE browser.
③ Set server port. The default server port is 6036.
④ Connect internet. There are three ways to connect internet.

If you have a DHCP server running and would like your device to automatically
obtain an IP address and other network settings, check the checkbox beside “Obtain
an IP address automatically”. Then the device will distribute IP address, subnet
mask, and gateway IP and DNS server.
 If you want to configure your own settings, disable “Obtain an IP address
automatically” item and input the IP address, subnet mask, gateway IP and DNS
server.
 If you connect internet through PPPoE, disable “Obtain an IP address automatically”
item and check PPPoE checkbox and then enter username and password. Once the
setup is completed, your device will automatically dial up into your network.
⑤ Test the effectiveness of the network by clicking “Test” button after you set up the
network.
⑥ If the network is connected, please click “Apply” button to save the setting.
11.2 Sub Stream
To set up sub stream:
①
Go to Main Menu  Setup  Network  Sub Stream interface.
② Select fps, resolution (CIF Only), and quality, encode and max bit rate.
③ Select “All” to set the same settings for all channels.