6
7
You can enable the NAT function in the interface or set it in the network
configuration after exiting the wizard. You can scan the QR code through the
mobile surveillance APP for iOS or Android to easily view your cameras.
►Web Client Access Through NAT Function
ADD CAMERAS
Click Start→Settings→Camera to go to the “Edit Camera” interface.
Click “Add” to add cameras.
Select an IP camera / panel and then choose the terminal type as needed. Enter
the device name and password and click “Add” to add devices.
IP Panel: Four terminal types can be selected. Facial panel or attendance terminal is suggested.
Facial IPC: IP Cameras which support face recognition can choose this one.
PEOPLE MANAGEMENT
Click Start→People Management to go to the people management interface.
1. Click and then set the company name, department and position of people.
2. Add face pictures and relevant information for each group.
Select a group and then click “Add” to go to the following interface.
Click “Select face” to choose a face from snapshot gallery or external faces.
Fill out other info. (attendance area, pass through area) and click “Add”.
Multiple face pictures can be added from “External faces” too. Put pictures
and the file of personal information under the same directory of your mobile
storage device. Select this directory and click “Full Entry” to add.
Edit the file as follows:
Note: Currently, only when the face picture is added to the face database and
successfully matched by the IP Panel, can the Smart Management Terminal
(SMT) show the temperature and picture of the person.
LIVE DISPLAY
Area
①
: Real-time statistical information display
Area
②
: Real-time intelligent detection information display, including face
match, body temperature, mask status, area, etc.
Area
③
: Real-time face capture and temperature measurement display
