34
2-5-3. MENU > NETWORK > Notification
In Callback, set up IP addresses of client sites
so that Events detected in local system can be
notified to multi remote client sites
simultaneously. Enter IP addresses of client
sites to receive events notifications on remote
sites. Press
to pop up the virtual keyboard.
Callback Interval
: Select Callback Interval to
set time interval between consequential events
being sent to remote site.
Note
: Any events occur between the pre-set interval time will not be sent to remote site. e.g. If
the interval is set as 30 seconds, only the events occur every 30 seconds since the first event will
be sent to remote site.
In Email, Events can be notified to personal email addresses by text message.
E-Mail Interval
: Select E-Mail Interval to set time interval between consequential events being
sent to remote site via email.
Recipient
: Enter the email address of a recipient. Up to 5 recipients can be entered.
Note
: Any events occur between the pre-set interval time will not be sent to remote site. e.g. If
the interval is set as 30 seconds, only the events occur every 30 seconds since the first event will
be sent to remote site via email.
SMTP Server
: Enter SMTP server using the virtual keyboard. SMTP server information can be
obtained from a system administrator.
Sender
: Enter the address/name where the email is being sent from.
SSL/TLS
: Check SSL/TLS to send an email via an SMTP server requiring SSL authentication.
2-5-4. MENU > NETWORK > Transmission
In Transmission, Network transmission can be
controlled with ips and bandwidth.
Note
: Max. ips on Network transmission is
120ips@16ch-DVR and 60ips@8ch-DVR.(NTSC)
