manualshive.com logo in svg

Vitek 750 TVL Dome Cameras Series, Руководство пользователя

Поделиться
Скачать
Vitek 750 TVL Dome Cameras Series Скачать руководство пользователя страница 23

22

OSD MENU FEATURES/SETUP

Sets ON/OFF for enabling/disabling PRIVACY.

Up to 15 privacy areas are available and each area is programmable in size and

location. The number of privacy areas is limited to four when MOTION DET > 

MONITOR AREA is ON.

The privacy areas are masked with the color selected by PRIVACY MASK>COLOR.

5. PRIVACY MASK

PRIVACY MASK SETUP

AREA SEL
DISPLAY
POSITION
COLOR
TRAMSP
MOSAIC

RETURN

1/15
ON

RED
1.00
-----

5-1. AREA SEL 

(default: 1/15)

5-2. DISPLAY 

(default: OFF)

Displays OFF/ON for the mask area which you selected ‘AREA SEL’

5-3. POSITION 

: Adjusts the mask area X,Y-Axis position which you selected ‘AREA SEL’

: Selects one of AREA1~AREA15 to be adjusted.

• TOP/BOTTOM: ◄button moves up and ►button moves down the top (bottom)

  border of the selected window at AREA SEL.

• LEFT/RIGHT: ◄button moves left and ►button moves right the left (right) border

  of the selected window at AREA SEL.

5-4. COLOR

: Selects one of 8 colors (Red, Green, Blue, Yellow, Cyan, Magenta, White,

  Black) for the selected mask window at AREA SEL.

5-5. TRANSP : 

Transparency rate for the mask can be adjusted.

0.00 - Mask is fully transparent and not visible.

0.50 - Mask is 50% transparent.

0.75 - Mask is 25% transparent.

1.00 - Mask is not transparent.

5-6. MOSAIC

Enables or disables the mosaic effect for the selected mask window at AREA SEL

Содержание 750 TVL Dome Cameras Series







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды