Vitec Videocom - Litepanels
www.litepanels.com
In case an issue arises with any of the main icon functions, e.g. a low powered battery -the corresponding icon turns red
and a question mark comes up in the top right hand corner. Selecting the button next to the question mark icon will
show on the screen what the issue is, in this case low input voltage due to an empty battery.
The same is true when the fixture goes into over temperature mode. The thermometer icon will turn red and the
question mark will pop up. Same happens if the FAN turns red and information on the failure will show on the screen.
DMX 5 PIN XLR MODULE
All the same instructions apply to the 5 Pin XLR version of the communications modules, other than this
module has a TERMINATION switch. UP is ON and Down OFF.
When switched ON, this indicates that this module is being used in the last in-line light fixture in the DMX
string. The unit will probably function if it is not switched on, however the DMX signal is not as robust and in
some circumstances, remote control problems may occur. It is recommended to be used.
The other difference is that the RH 5 pin XLR jack is the input and the LH is the output (to the next light in the
chain).
Congratulations on your new Astra and communications module.
Please visit us at www.litepanels.com for more information or any
questions you might have and don’t forget register your product.
Please visit us online at
http://www.litepanels.com
and register your product
