Vitec Videocom - Litepanels
www.litepanels.com
DMX Control Modules
These instructions are provided to assure safe operation and to prolong the life of your Litepanels product.
Please read these important instructions and keep them in a safe place.
•
Clean the module with a dry cloth only.
•
Install the Module in accordance with the manufacturer’s instructions.
•
Modules are only useable for Litepanels Astra family products.
•
Do not place near any heat sources such as radiators, heat registers, stoves or other apparatus that produce
heat.
•
WARNING: To reduce the risk of fire or electric shock, do not expose the fixtures to rain, moisture or other liquids.
•
Service is required when the apparatus has been damaged in any way such as:
o
LCD display is cracked/not clear, or the text is not readable
o
Liquid spilled into the apparatus.
o
The unit has been exposed to rain or moisture.
o
The unit has been dropped or the enclosure is damaged.
o
The unit does not operate normally or performance changes in any significant way.
Mounting Instructions
Remove the communications module well cover on the rear panel of the Astra. This also exposes the fan control switch
on the right inner side.
Up position is FAN ON/AUTO mode. Down position is Fan OFF.
However, attaching a communication module automatically overrides the function of the manual fan switch. To connect
the communications module you just slide it into place and then push it up until it locks. The boot-up screen is the
Litepanels logo and then it changes into the home screen after it has completed boot-up.
