Vitec Multimedia FIM-102D, Инструкция по эксплуатации

Страница: 11 / 39

FIM-102D FIBER INTERFACE 1-7
USING THE FIM-102D IN CONJUNCTION WITH THE EF-1M AS A STAND-ALONE PARTY LINE EXTENDER
Using a Clear-Com EF-1M at each end of a FIM-102D set, you can extend Clear-Com or RTS 2-wire party line
intercoms over a fiber-optic link independent of a Matrix intercom system.
FIM-102D FIM-102D
EFI-M Interface
Clear-Com
or RTS 2-wire
party-line
EFI-M Interface Clear-Com
or RTS 2-wire
party-line
Figure 3: EF-1M and FIM-102D as Party-Line Extender
FIM-102D Two-Fiber Configuration
In a standard two-fiber system, identical FIM-102D units are used at each location. The units both transmit at 300 nm
on ST connector “Fiber Out” and receive the 300 nm signal on ST connector “Fiber In”. They are connected by the
two fibers so that the optical output of each box is connected to the optical input of the other. In both one- and two-
fiber systems, the input of channel 1 on one unit becomes the output of channel 1 on the other unit and vice versa.
The two FIM-102D units in the two-fiber version are identical, so the units are interchangeable.