VitBest M-0404SE User Manual
2
）
Double click the PC
tool software
.It will automatically
connect to the matrix via COM port.
3
）
If the connection is
successful
, the corresponding display
will be blue
4) If the connection is
failed
, please
check
the causes and
retry
again according to the software’s hint.Usually,the
causes may be as follows: No COM port connected to the
computer,the COM port is used by other programmes ,the
matrix is not working well,and so on.
6) The C
omboBox
on the right of Port shows the COM ports
that connected to the computer. If there’s no COM port
connected,it will shows COM0,COM1
…
COM9.
7) The
button
on the right of Status indicates the current
status of connection.You can switch the connection status
by pressing this button.
Instruction of control operation of matrix:
1) Click the
rectangle
which is on the right of output port and
on the bottom of the input port can switch output port’s input
source.And the rectangle’s color will change to
blue
if the
