Vitals MASTER EST 5.8ba, Руководство по техническому использованию

Страница: 13 / 48

2 5 2 4 2 5
The cleaning process not recommended using abrasive materials such as
solvents, ammonia water, and gasoline, alcohol that can damage the body, the
connector pins and terminals of the product.
Transportation.
Transportation unit allowed all kinds of automation transport, provide
safety products, in accordance with general rules of traffic.
Avoid moving the product by the connector and attached cables attached.
Take care not to damage the product at transportation. Do not place heavy
objects on automation unit.
Storage
Recommended to store the product in a dry ventilated place at
- 15 °C ... +55 °C and relative humidity air no more than 80%.
In the preparation of the product to storage:
1. Disconnect all cables commuting.
2. Remove dust, dirt from the outside of the enclosures, connectors and
terminals.
3. Grease with a thin layer of engine oil and the connector pins terminals.
TRANSPORTATION AND STORAGE TRANSPORTATION AND STORAGE
7
WARNING!
If the connector contacts and terminals get wet, immediately
wipe them and lubricate with engine oil.
If moisture gets inside the product casing, contact service
center.
NOTE !
In case of difficulty in conducting product service should seek
help from the dealer.
WARNING!
Do not move or store the product connected to it with electrical
wires.
NOTE !
After removing the product from the store and the connector
pins clean the terminals of the lubricants.
WARNING!
Store the product in the same room with flammable, acids,
alkalis, mineral fertilizers and other corrosive materials
prohibited.