Usage
PLEASE NOTE
■
For hygiene reasons, the product should only be used by one
person. Thoroughly clean the attachment used immediately
after use.
■
Do not use peeling products on affected areas of the skin be-
fore or after use.
■
Do not use the product more than once a week on dry skin and
twice a week on oily or combination skin.
■
Do not use for more than 5 minutes.
■
Test the product on the forearm before
fi
rst use. If the skin does
not react undesirably, the product can be used on the face.
■
Tingling and reddening of the skin is normal during use and
should disappear within half an hour.
■
To prevent blemishes forming, keep the attachment steady
on the skin during use.
It is recommended to stretch the skin,
e. g. on the cheeks, with your
fi
ngers, so it is not sucked in.
■
Move the product slowly in strips.
Do not circle and do not
press the skin!
Remove make-up before treatment and clean the face as usual.
Clean the face after each treatment and apply a care product.
Four attachments are included in delivery:
•
Large round pore attachment
for pore cleansing, not suit-
able for the eye area
•
Small round pore attachment
for pore cleansing in places
that are dif
fi
cult to reach, e. g. in the nose area, not suitable for
the eye area
•
Oval attachment
to stimulate blood circulation in the skin
•
Microcrystalline attachment
for microdermabrasion: Re-
moval of dead skin
fl
akes by friction and suction on the face,
elbows, knees, etc.
Pore cleansing
Tip:
For best results, pores should be opened before use. Dip a
small clean towel in hot water, wring it out and put it on the face.
Alternatively, you can carefully hold the face over a bowl of hot
water or use the product directly after showering or bathing.
1. Dab the face dry.
2. Put the round pore attachment on the suction head.
3. Slide the on / off switch upwards. The product switches on.
4. To remove
sebum and blackheads,
place the pore attach-
ment on the skin and move it slowly over the skin in small strips
from the middle of the face to the outside. Only pull the strips in
one direction. If necessary, repeat the process. Brie
fl
y suck in
acne,
then quickly remove the pore attachment again. Do not
move to the sides!
5. After treatment, switch off the product by sliding the on / off
switch downwards.
6. Remove the pore attachment and clean it.
Microdermabrasion
1. Dry the face well.
2. Put the microcrystalline attachment on the suction head.
3. Slide the on / off switch upwards. The product switches on.
4. Start with facial treatment on the chin and work your way to
the forehead. Slowly move the microcrystalline attachment
outward in strips from the middle of the face. Only pull the
strips in one direction and do not press the product!
Please
note:
The microcrystalline attachment can also be used on
body parts such as elbows or knees.
5. After treatment, switch off the product by sliding the on / off
switch downwards.
6. Remove the microcrystalline attachment and clean.
Stimulate skin circulation
1. Dry the face well.
2. Put the oval attachment on the suction head.
3. Slide the on / off switch upwards. The product switches on.
4. Brie
fl
y suck in skin areas where wrinkles form (e. g. around
the mouth), then quickly remove the oval attachment. Do not
repeat too often in one place, so that blemishes don’t form!
5. After treatment, switch off the product by sliding the on / off
switch downwards.
6. Remove the oval attachment and clean.
Cleaning and storage
PLEASE NOTE
■
Never use corrosive or abrasive cleaners.
• Clean the attachments under running water immediately after
each use. If necessary, use a mild detergent and cotton buds.
• If necessary, wipe the product with a damp cloth and then dry it.
• Keep the product away from dust, dirt and direct sunlight in a
dry place away from children and animals.
Maintenance
• If the attachments on the suction head do not hold, one of the
silicone rings may be damaged and must be replaced. Delivery
includes replacement silicone rings.
• Replace
the
fi
lter in the suction head if it is dirty. Delivery
includes replacement
fi
lters.
Change
fi
lter
1. Pull the insert out of the suction head
(see image).
2. Use a pointed object (e. g. needle, twee-
zers) to pry the dirty
fi
lter out of the suc-
tion head.
Similar to the one shown.
3. Insert a fresh
fi
lter into the suction head.
4. Insert the insert back into the suction head.
Technical data
Article number:
09215
Model number:
GWF174
Power supply:
3 V DC (2 x 1.5V; type AA)
Operating instrutions ID:
Z 09215 M DS V1 0419
Disposal
Dispose of packaging materials in an environmentally sound
way and take recyclables to collection facilities.
Remove batteries before disposing of the product and take
them to the appropriate collection site separately from the
product.
This product is subject to European Directive 2012/19/EU
on Waste Electrical and Electronic Equipment (WEEE). Do
not dispose of the product as normal household waste, but
through an of
fi
cially approved disposal business according
to environmental regulations.
Article number: 09215
EN
Operating Instructions
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
✆
+49 38851 314650 *)
*) Calls to German landlines are subject to your provider’s charges.
All rights reserved.
