EN 14
Before Initial Use
PLEASE NOTE!
■
Never remove the rating plate and any possible warnings!
1. Check the items supplied for completeness (see the "Items Supplied and Device
Overview" chapter) and possible transport damage. If you
fi
nd any damage to the
components, do not use them (!), but contact our customer service department.
2. Remove any
fi
lms or stickers that may be present from the device and accessories.
Use
1. Plug the mains plug into a properly installed plug socket which matches the technical
data of the device.
2. Fully unwind the mains cable (
4
).
3. Place the attachments you want onto the massage heads
(
1
).
For hygiene reasons, the device should always be
used with attachments.
4. To switch on the device, move the On / Off switch (
2
) to
the position you want (
1
= normal speed,
2
= high speed).
5. Hold the device by the handle (
3
) and gently press the
massage heads against the skin.
Do not press too
fi
rm-
ly!
The device vibrates and massages.
Massage with the device for as long as you want.
We recommend massaging one area (e.g. neck and
shoulder area) for no more than 15 minutes.
6. To switch off the device, move the On / Off switch to the
0
position.
7. Remove the mains plug from the plug socket.
Cleaning and Storage
PLEASE NOTE!
■
Before commencing the cleaning, note the safety instructions in the "Safety
Instructions” chapter!
■
Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the de-
vice. These could damage the surfaces.
• Make sure that the device is not connected to the mains power.
