EN 16
Overview of the Main Unit
13
10
14
11
9
12
9
Heating rod
10
On / Off button
11
Operating lamp
12
Mains cable
13
Eyelet for hanging up
14
Release button for the attachments
Basic Use
PLEASE NOTE!
■
Before the attachments are
fi
tted or removed, ensure that the mains plug has been
pulled out and the device is cool.
■
CAUTION – Danger of Burns!
The attachment becomes hot during use. Only hold
the device by the handle. Keep the attachment away from the face, in particular the
eyes. Also maintain a safe distance between the head and attachment of at least
3 – 5 cm.
■
The hair should be washed and dry or only slightly damp.
The basic use of the device is explained at this point. The individual attachments will be
addressed in the next chapter.
1. Place the attachment you want onto the heating rod (
9
). It
must engage easily. Do not apply any force! When placing
on the curling iron (
1
) and the hair straightener and crimp-
ing tongs (
8
), make sure that the lever is on the same side
as the On / Off button (
10
).
The straightening brush (
7
) is placed on so that the smooth
back (and not the bristles) is on the same side as the On
/ Off button.
To take off the attachments, press the release button (
14
)
and pull the attachment off the heating rod at the same
time.
2. Fully unwind the mains cable (
12
). Connect the mains plug
to an easily accessible plug socket.
3. To switch on the device, press the On / Off button. The
operating lamp (
11
) starts to light and the attachment is
heated up.
