PRODUCT OVERVIEW
Pair your Bluetooth®-enabled device and connect this receiver to your
car. Wirelessly stream music and take hands-free calls from your
smartphone or Bluetooth®-enabled device.
CHARGING
When you use this receiver for the first time, or you haven't used it
for a long period of time, charge the battery. It will take approximately
2 hours to fully charge.
• The LED will flash red when the battery gets low
• Charge the receiver with the included USB charging cable.
Use a suitable port or 5V/1A power adapter (sold separately)
• The LED will turn red while charging, and turn OFF when charging
is complete
PAIRING
This receiver must be paired to a Bluetooth
®
-enabled device before you
plug it in to your car. Pair first, then connect it to your vehicle's AUX IN.
Pairing range is approximately 10m (33ft.), and obstacles between the
receiver and the Bluetooth
®
device may reduce this range.
1. Turn your receiver ON by pressing the MFB button. The LED will flash
blue and red. After ten seconds, it will enter pairing mode.
2. Enable the Bluetooth
®
function on your device and find and select
"VITAL 8075521" in the detected device list. Enter "0000" when
prompted for a password (If necessary). When your device is
successfully paired, the LED indicator will flash blue slowly.
NOTE:
The receiver will automatically connect to your paired device on
the next use, as long as your device is ON and within range. If no
Bluetooth
®
connects within ten minutes, the receiver will automatically
turn OFF to save power.
HANDS-FREE CALLS
When a smartphone is paired to this receiver, you can make and receive
phone calls through this device.
• Press the MFB to answer an incoming call and press it again to end
• Press and hold the MFB button to reject an incoming call
• Double press the MFB to redial the last number called
NOTE:
If music is playing and you receive an incoming call, the music
will stop. It will resume playing when the call ends.
OPERATING INSTRUCTIONS
TO
DO THIS
Power ON
Press and hold the MFB.
Power OFF
Press and hold the
MFB.
Adjust the volume
Press the
+/- buttons.
Next track
Press and hold the + button.
Previous track
Press and hold the - button.
Bluetooth
®
pairing
Automatically enters pairing mode when powered ON.
Answer a call
Press the MFB.
End a call
Press the MFB again.
Reject a call
Press and hold the MFB.
PLAYBACK
1. To start playback, press the MFB. Press the MFB to pause playback.
A passenger may also play and pause the music through the
Bluetooth
®
-connected device.
2. Press and hold both the MFB and the + button simultaneously to
switch the receiver into standby mode.
SPECIFICATIONS
Bluetooth
®
V 4.0
Range
10m (33ft.)
Bluetooth
®
Protocol
A2D v1.2, AVRCP v1.0, HFP v1.5
Mic sensitivity
-42dB ± 3dB
Frequency
20Hz-20kHz
Battery
3.7V/170mAh
Playback
Approx. 7 hours
Talk time
Approx. 8 hours
WARNINGS
•
DO NOT
use this apparatus near water or moisture
•
DO NOT
install near any heat sources such as radiators, stoves, or
other apparatus (including amplifiers) that produce heat
•
DO NOT
block any ventilation openings
•
DO NOT
install equipment in a confined space
• Clean only with a dry cloth
• Only use attachments/accessories specified by the manufacturer
• Refer all servicing to qualified personnel
8075521A
WIRELESS AUDIO RECEIVER
Instruction Manual
WHAT’S INCLUDED:
• Wireless audio receiver
• Micro USB charging cable
• Instruction manual
FEATURES:
1. Bluetooth
®
4.0 supports A2DP
2. Hands-free calling
3. Plug and play, no driver or software
required
4. Built-in rechargeable battery
5. Up to 7 hours of playback
COMPONENT IDENTIFICATION:
1. USB charging port
2. LED indicator
3. Volume up/Next track
4. Volume down/Previous track
5. MFB (multi-function button)
6. 3.5mm audio plug
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth
®
SIG, Inc. and any use of
such marks by The Source (Bell) Electronics Inc. is under license. Other trademarks and trade names are those
of their respective owners.
