4
STEP T HREE
4
10’ Pergola Trellis Instructions
Lay one of the trellis assemblies on the floor and insert
the trellis assembly into the pergola post through the routed
holes as shown. Make sure all the horizontal spindles and
rails are bottomed out inside the pergola post.
Fasten the pergola post to the horizontal spindles and
rails using nine, 3 in. screws as shown.
Repeat the two steps above for second wall half.
Insert the rail inserts into the cavity in the top and bottom
rails as shown. Insert until the rail bottoms out on the
vertical spindle.
Insert the assembly through the centre post as shown.
Note the locations of the pre-drilled holes.
For asthetics purposes, all the screws should be on the
same side of the wall.
1
2
3
Pergola Trellis Assembly
4
1
3
2