Visual Tools VX ATM, Инструкция по установке и эксплуатации, Страница: 10 / 16

User manual 8
Configured : It shows whether the connection to the ATM is running or is stopped.
In the lower part you can choose the different types of connection for the ATM.

USB ports. Direct connection to the USB ports.

USB hubs. This option is not available for the ATM.

HTTP. The ATM data entry can be done through a network connection between the
ATM and the VX-ATM, for that purpose you need to integrate a specific protocol.
The next item shows the type of transactions that the unit can store along with the recording
video.

Customer: Client ticket print.

Journal: Detailed information of the ATM use (types of transactions, number of
transactions , etc..)
The last option is the text overlay in remote live video and recording video and is checked by
default.
In the VX-ATM units you can record
ATM’s transactions without time-lapse recording. The
Recording section shows what type of recording frequency has each camera. If it’s only event
recording you need to have at least 2 pre-event seconds to guarantee that the video
associated to the transaction is properly recorded.
When programming the POS you must press always the SAVE button after any connection
change and always after connecting a data line.
4.1 ATM events
In the ATM functionality configuration is possible to create events and alarms depending on
the information received. Press the POS EVENTS button in the POS configuration window
and you will access to this window where you can define the text strings able to generate an
event or an alarm.
Figure.- 5 ATM events configuration window
Apart from the use of key text strings is possible to use any incoming text string to generate
events or alarms.
When a ATM receive any of the defined words it generates an event / alarm than can be
consulted in the recorded video, there is also just for an alarm, the possibility of sending a
VAV with associated images.