Guardian VIP
March 2019
Visual Engineering
Video solutions. Integrated
visualengineering.co.uk
Page 37
The Status - Maps Tab
1. Radio Buttons
2. Node Information
3. GPS Information
The radio buttons enable you to choose between Network and one of four map displays for the
Mesh.
Note:
When you are in
Network
mode the
Upload, Set Coordinates
and
Reset Locations
buttons
are greyed out.
Under the radio buttons, node information about the current attached node is displayed. This was
covered earlier in the Status Tab section.
If the node that we select has a GPS
receiver connected and the
Use
GPS
box is checked, the node can
broadcast precise information about
its location to other nodes or fixed
assets on the Mesh.
1
2
3
4
5
6