ASSEMBLY INSTRUCTIONS
WET
(B)
(D)
(G)
(A)
(E)
(H)
(F)
(C)
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A
LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN
FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS
ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
INSTRUCTIONS FOR MOUNTING FIXTURE OUTDOORS AND/OR IN WET
1.
Mounting surface should be clean, dry, flat and 1/4” larger than the backplat
on all sides. Any gaps between the mounting surface and backplate exceeding
3/16” should be corrected as required.
2.
With silicone (ex. GE-108) caulking compound, caulk completely around where
back of the backplate meets the wall surface to prevent water from seeping into
outlet box.
Marine Outdoor Wall Light
Item # SLO2001
