14. Thread the finial (K) to the bracket (J).
15. Rotate the door knob (N) 180 degrees to open the door.
16. Attach the glass panels (L) on the side of the frame and secure by bending the metal tabs.
17. Attach the glass panel (M) on the door of and secure by bending the metal tabs.
18. Insert bulbs (not included) into the sockets, then close the door.
19. Installation is complete, turn on power at fuse or circuit breaker.
***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.
WITH SILICONE CAULKING COMPOUND, CAULK COMPLETELY AROUND METAL
BASE MEETS THE WALL SURFACE TO PREVENT WATER FROM SEEPING
INTO J-BOX.
Rosedale Grand Medium Bracketed Wall Lantern
Item # RC 2048
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A
LICENSED ELECTRICIAN.
WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN
FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY
DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO
REMOVING. RETAIN ALL PACKING MATERIAL UNTIL INSPECTION AND
INSTALLATION ARE FINAL.
WET
L I S T
E D
C
US
Intertek
CM
Safety cable
Cable lock nut
N
GN
D
Fig.1
Fig.2
TO assemble safety cables:
1.Join fixture safety cables with safety
cable from wall.
2.Wrap both safety cable around the
cable lock nut.
3.Insert screws into both holes on cable
lock nut,secure screws with screwdriver.
4.Push the cable lock nut into outlet box.
Glass L
Glass M
