User Quick Reference Guide
The detailed use guide for this device could be found in car user manual too.
On_User Status
When engine on, push POWER button will switch on radio to On_User Status
OFF_User Status
When the radio is power on, one push of POWER button will change the radio to
OFF_User Status. The standby screen illuminates with clock. The radio’s BT link is no
more active. Unit will switch on if POWER button is pressed.
Radio Volume Adjustment
Increase Volume
Rotate on knob will adjust radio volume level. Radio LCD will display the current
volume level.
Rotate clockwise will increase radio volume.
Decrease Volume
Rotate anti-clockwise will decrease radio volume.
Mute and Vol 00 Status
When volume is decreased to 0 by rotating POWER button anti-clockwise (Vol 00),
audio will be muted and source will not have paused
.
FM/AM Operation
Band Select
Short press RADIO button will switch to tuner mode.
Frequency Store
Store in Radio Source Screen
When in radio source screen, long press on preset number button (1-6) will store the
current station into corresponding preset.
Radio will output Roger Beep to indicate.
Store Presets in List Mode
When in list screen, long press on preset number button (1-6) will store the selected
station to the
corresponding preset but not switch to it.
Radio will output Roger Beep to indicate.
Frequency Recall
Short press on preset number button will recall the preset station that stored in the
button
Manual Tune
When in radio source screen, short press on <</>> button or Rotate the right knob will
decrease / increase the frequency in a step of 0.05MHz(FM) or 1KHz(AM).
Auto seek
When in radio source screen, long press on <</>> button will start continuous
frequency scrolling until the
button is released, and then tuner stops on the next/previous station with good field
strength.
