VistaQuest VQ5218, Руководство пользователя

Страница: 13 / 38

12
• Automatically the number displayed on the screen is decreased
by one. For example, if the screen displays 018 when the
camera is powered on, after one photo has been captured, 017
will appear. If the memory is full, “Memory FUL “ will appear on
screen.
• Make sure that your fingers do not cover the lens.
• Do not take the memory card or battery out when the camera is
saving the image, otherwise the image will not be saved
completely.
Using the Self-timer and Burst snapshot
Use the self-timer to set a delay from the time the SHUTTER button is
pressed to the time the image is shot. Use the burst snapshot to take
pictures continuously.
1: Turn the power on, and set the camera to the Capture Menu.
2: Press the UP or DOWN button to select [Drive Mode] then press the
RIGHT or OK button to launch the submenu.
[Off]: Take photos without delay.
2 seconds: The Shutter release will delay for 2 seconds.