VistaQuest VQ3010, Быстрый старт

Страница: 8 / 13

- 7 -
Installing the SD card (option)
Caution:
The card can only be inserted one-way; forcing it may damage the camera or
card. Do not insert or remove a card when power is on.
To insert an SD card:
a. Turn off the camera and open the battery cover.
b. Orient the card as shown (on the right top side).
Push the card into the slot to the connector.
c. To remove the card gently push the card until
it get released from the hooking mechanism.
After it has popped it out completely, close the battery cover.
Note:
1. If the SD card is present in the camera, and then the picture/ video will save in
the SD card. If no card is installed, the camera uses internal memory.
2. If the “Memory Full” warning message appears on the LCD monitor, it
means the SD card or internal memory is full. Please remove the memory and
insert a new one or move/store all picture/video in memory to your computer.
Using flash light
When you take pictures at night, indoors, or in gloomy conditions, please use the flash.
Press the
button ( ◄ ) repeatedly to scroll through the flash options.
Flash Off:
the flash is off. (Default)
Force Flash:
flash fires regardless of the ambient lighting conditions.
Auto Flash:
the camera detects ambient lighting conditions, and the
flash fires if it detects insufficient light.
Press the
Shutter
button to take pictures after the blink finishes.
Note:
1.Video cannot be stopped during recording.
2.If the icon appears on the TFT like the right side, please use
◄ or ► button to select “Yes” or “No” then press the
OK
button to confirm.