www.vistacnc.com
- 4 -
www.vistacnc.com
- 4 -
iMach
III
P1A Pendant Manual v 1.0
CONNECTION and START
•
Directly plug the USB cable into any USB port on the PC.
•
Start Mach4 application.
•
Click Config from menu, select Config Plugins, and enable P1A Pendant.
•
Close Mach4 application and restart Mach4 application.
FUNCTIONS and OPERATIONS
1. Axis, Step Size and Axis Zeroing
1.1 Axis selection
Turn axis selection knob to X, Y, Z, or A position to select an axis to jog.
1.2 STEP SIZE selection
Turn axis selection knob to STEP SIZE mode. Turn MPG few steps to cyclically select the step
size. Selected step size displays on Mach4 Screen.
1.3
Axis zeroing
When Axis Selection knob is at X, Y, Z or A position, turn MPG few steps to zero selected axis.
2. MPG (Manual Pulse Generator) mode
Turn mode selection knob to select MPG mode.
