2
— Installation and Configuration
2.1 Package Contents
Installation of the camera must be performed by qualified service personnel in accordance with all
local and national electrical and mechanical codes.
Carefully remove the camera and its accessories from the carton and verify that they were not
damaged in shipment.
The content of the package includes:
1. Camera 2. Accessory pack 3. Template Sheet 4. This manual
2.2 Camera Overview
See the line diagram in the relevant section in this manual for dimensions.
1) Loosen the four torx screws located the front of the housing leaving the screws intact
in the bubble (top case).
2)
Place the
Template in the location you want the camera to be fitted and make the mounting holes and
cable hole in the required location.