Vista VP-HDA20IR-SMW, Руководство по установке

Страница: 15 / 39

10
3.4 Auto Scan
The Auto Scan supports up to 17 programmed directions at user-programmable speeds.
AUTO SCAN SETUP
NUMBER : 01
TITLE : A01
MODE : NORMAL
SPEED : 5 STEP
START ANGLE : ----- ----- --
END ANGLE : ----- ----- --
SCAN DIR : CCW
SWAP : OFF
DWELL : 03 SEC
FOCUS : AUTO
SAVE AND EXIT(ESC TO CANCEL)
NUMBER
01 ~ 08, 10 ~ 17, 09 : AUTO-PAN mode (endless panning)
TITLE up to 6 characters
MODE NORMAL, VECTOR, RANDOM (AUTO-PAN mode: NORMAL, RANDOM only)
NORMAL Move from start point to end point in panning only
VECTOR Move from start point to end point including tilt and zoom simultaneously and
linearly.
RANDOM Move randomly between the start point and the end point
SPEED 1 ~ 13 step, the lower number means the slower speed.
SCAN DIR Set the Scan direction, CCW (Counter Clock Wise), CW (Clock Wise).
SWAP Swaps the start point for the end point.
DWELL Set the dwell time at the both end, 01 ~ 99 seconds.
FOCUS AUTO, MANUAL
Follow these steps to program Auto Scan:
1. Press the
MENU key to display the main menu on the monitor. Scroll to Auto Scan and press
the Right key.
2. Select “
NUMBER
” and set the desired number by pressing the
Right or Left key.
3. Select “
TITLE
” and press the
Tele or Wide key to enter the title edit mode.
4. Press the Tele or Wide key to change the alphanumeric characters and move the next position
by pressing the Right or Left key. Or move down to the character table and press the IRIS
Open key at the desired character then the cursor position moves to the next position
automatically. Press the Right or Left
key at the “ALL DELETE” field to delete all characters.
Press the Right or Left
key at the “EXIT” field to finish title edit menu.
TITLE EDIT MENU
(CTRL KEY)
A01
$
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 ( )
ALL DELETE
EXIT(ESC TO EXIT)
5. Select “
MODE
” and “
SPEED
”.
6. Select “
START ANGLE
”. Press the
IRIS Open key
then the “CONTROL” displays. Move the
desired position and the zoom position. Press the IRIS Close
key then the “CONTROL”