17
Intelligent
(Motion, Alarm, Quick Zoom)
For use in low traffic areas. Can provide tracking and zooming into a motion
detection area. Detection results will vary with scene content / movement and
does not work if WDR is enabled
Motion
(4 motion detection zones)
Det.Setting
Sensitivity:
0 - 20 (the lower the number the lower the sensitivity)
Obj. Keep LV:
0 - 60
Motion Est:
0 - 20
Signal Out:
Not applicable as no alarm output
Window Tone:
0 - 6 (applies level of obscurity to non motion area)
Window Zone:
0 - 3
Window Use:
Off, On
Det H-Poz:
0 - 60 (Horizontal position of zone)
Det V-Poz:
0 - 40 (Vertical position of zone)
Det H-Size:
0 - 60 (Horizontal size of zone)
Det V-Size:
0 - 40 (Vertical size of zone)
Alarm
Not applicable as no alarm output
Quick Zoom
(this enables digitally zooming in on a user defined motion area)
Moving:
0 - 240 / 60sec (the lower the number the faster the area moves)
Zoom In:
0 - 240 / 60sec (the lower the number the slower the zoom state)
Standby:
0 - 240 / 60sec (the lower the number the faster the reset period
before the next event)
Synchronous:
Off, On
Tracking:
Off, On (tracks moving object through motion area)
Repeat:
Off, On (Off moves to next motion event in the defined area)
SYSTEM
Com:
Not applicable
View angle:
Wide 4:3, Wide 16:9, Normal
CVBS:
PAL, NTSC
Language:
English
Cam Title:
Apply an 8 character name to the camera
Reset:
Push ENTER on the OSD tact switch to restore the defaults
