background image

Vista Dental Products Terms and Conditions of Warranty

The operator assumes all risk and liability for damages arising out of the 

improper use of the VALIANT™ curing light. In the event of a defect in material 

or workmanship, Vista Dental Products is limited, at its option, to replace of 

the defective product, a part thereof, or reimbursement of the actual cost of 

the defective product. In order to take advantage of this limited warranty, the 

defective product must be returned to Vista Dental Products.

The VALIANT™ handpiece is warranted to be free from defects under normal 

usage conditions for 3 years of its date of delivery; the batteries for 1 year. 

There is no warranty, expressed or implied, of merchantability or fitness. The 

manufacturer’s sole obligation under this warranty is to opt to either repair 

or replace the defective part(s) or product. If service must be performed to 

correct a defect, then the manufacturer will provide the service at its factory 

according to the mutual agreement made in advance. The manufacturer and 

its distributors will not accept the return of the product unless the return is 

authorized and shipped in accordance with the manufacturer’s instructions. 

Contact the local representative of the distributor or if purchased directly 

from the manufacturer for shipping instructions, a return authorization 

number, and ARS shipping label. There is no warranty, remedy or condition, 

expressed or implied, except as provided herein. The warranty and remedies 

contained herein are made by the manufacturer to the first buyer for dental 

use and are in lieu of all other agreements (expressed or implied), liabilities or 

remedies for breach of warranty. Vista Dental Products shall not be liable for 

consequential or incidental damages. No person or distributor is authorized 

to modify the terms of this warranty.

This warranty is void if any defect is caused by conditions beyond the 

manufacturer’s control, including acts of God, damage resulting from 

mishandling, neglect, misuse, improper maintenance, accident or alteration/

repair by anyone other than the manufacturer. The buyer assumes all liability 

for any damage caused by improper use of the product. The manufacturer 

assumes no liability for the user’s failure to follow the instructions contained 
in this manual. 

18

Содержание Valiant 601000

























Отзывы: