–
LEDs
- REC: Recording status (When recording is on, the red light will flash)
- POWER: System Power On/Off (When power is on, the green light will be illuminated)
- NET: Network status (When network is connected, the light will lash)
- HDD: HDD status (When the system is reading or writing to the HDD, the light will flash)
USB 2.0 Port
- USB2.0 connector, for downloading to USB pens / drives (plus upgrading firmware). There is a second USB
port on the rear of the unit, this can be used for the mouse.
POWER Button
- System Power On/Off, password protected
Numeric & Character
- Used for individual camera selection and selection of numbers & letters within the setup menus and searches.
Note. There is a short delay when pressing button 1, to allow for selection of cameras 10-16.
MENU
- Displays the menu on the screen
SEARCH/ARCHIVE
- Entering search mode. ((press twice from live mode)
PLAY (
▶
)
- Playback of the recorded data
- When in play mode press again to enter fast forward mode.
Reverse PLAY (
)
- Reverse play of recorded data
- When in play mode press again to enter fast rewind mode.
PAUSE ( ▌▌)
- To freeze picture on playback mode and live mode.
STOP / EJECT (■)
- To stop playback and go back to live mode.
- To eject DVD-RW, note: when pressed there is a 10 second delay till the eject button will operate
again.
