www.vistacnc.com
- 5 -
www.vistacnc.com
- 5 -
P2-S Pendant UCCNC Manual v. 1.0
FUNCTIONS and OPERATIONS
1.
Axis selection
Turn axis selection knob to X, Y, Z, or A position to select an axis to jog.
□
Selected axis name. It flashes at ½ second rate.
□
Step size and Step jogging rate. The size and rate display changes alternately every 2 seconds.
2.
MPG (Manual Pulse Generator) mode selection
2.1
STEP, STEP SIZE and STEP JOG RATE
STEP
In STEP mode, the selected axis moves 1 step at each MPG click (detent) with the step
size currently in the system and with speed of step jogging rate.
STEP SIZE
While pressing and holding the EN side button , turn MPG one or few clicks
clockwise or counterclockwise to select predefined step size.
STEP JOG RATE
While double clicking (press, release, and press, within half a second) and
holding the EN side button , turn MPG to change step jogging rate.
