www.vistacnc.com
- 5 -
www.vistacnc.com
- 5 -
P1A-S Pendant UCCNC Manual v. 1.0
1.
Axis selection
Turn axis selection knob to X, Y, Z, or A position to select an axis to jog.
□
Selected axis name. It flashes at ½ second rate.
□
Step size and Step jogging rate. The size and rate display changes alternately every 2 seconds.
2.
MPG (Manual Pulse Generator) mode selection
2.1
STEP
In STEP mode, the selected axis moves 1 step at each MPG click (detent) with the step size currently
in the system and with speed of step jogging rate.
2.2
VELOCITY
In velocity mode
Axis moves at 0 to 100% of maximum axis speed based on how fast the MPG wheel
is turned.
2.3
CONTINUOUS
In CONTINUOUS mode, axis moves at constant speed of continuous rate set in CONTINUOUR RATE
mode.
□
Continuous rate
