9. Install Wire Management Straps.
Wire management
straps (Q) attach to the perforated metal panel inside the
Vista spine simply by pushing the plastic pin (R) into the
hole in the center of the strap and into one of the holes on
the panel (Fig. 7). Wrap straps around cords as shown
(Fig. 8). Straps may be relocated simply by pulling out and
pushing plastic pin into another hole.
Figure 8
Figure 7
Q - Wire Management strap x 3
R - Plastic Pin
Vista
TM
10. Install back cover panel.
When all wires are in
place and secured, install back cover panel using 2
remaining 5/8” long Phillips head screws (G).
Carefully, move Vista into place by pulling and lifting on
lower shelf bracket elbows. Adjust glides if necessary.
To learn more about BDI’s complete line of home theater
furniture, visit us on the web at
www.bdiusa.com.
Enjoy!
