10
2.3 Resetting to the factory default settings
To reset the encoder to the original factory settings, go to the Setup
>
System
>
Maintenance web page (described in
“System
>
Maintenance” of User Manual) or use the
Reset
button on the encoder.
•
Using the Reset button:
Follow the instructions below to reset the encoder to the factory default settings us ing the
Reset button.
1. Switch off the encoder by disconnecting the power adapter.
2. Press and hold the Reset button with a straightened paperclip while reconnecting
the power.
3. Keep the Reset button pressed until the Status indicator blink.
4. Release the Reset button.
5. When the Power Indicator changes to Green (may take up to 40 seconds), the
process is complete and the network video camera has been reset.
6. The encoder resets to factory defaults and restarts after completing the factory reset.
CAUTION:
When performing a Factory Reset, you will lose any settings that have
been saved. (Default IP 192.168.30.220)
