IMPORTANT SAFEGUARDS
10.
11.
12.
POWER CORDS
-- Do not allow anything to rest on the power cord. Do not locate
video monitor or equipment where the cord will be abused by persons walking on it.
HEED WARNINGS
-- Follow all instructions marked on the video monitor or equi pmen t.
LIGHTNING
-- For added protection for video monitor or equipment during a lightning
storm, or when it is left unattended and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable system. This will prevent damage to
the video product due to lightning and power-line surges.
OVERLOADING
--Do not overload outlets and extension cords as this can result in a
risk of fire or electric shock.
OBJECT AND LIQUID ENTRY
-- Never push objects of any kind into video monitor or
equipment through openings as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never spill liquid of any kind o n the
product.
SERVICING
-- Do not attempt to service video monitor or equipment yourself as
opening or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE
-- Unplug video monitor or equipment from the wall
outlet and refer servicing to qualified service personnel under the following cond itio ns:
A. When the power-supply cord or the plug has been damaged.
B. If liquid has spilled, or objects have fallen into the video product.
C. If the video product has been exposed to rain or water.
D. If the video product does not operate normally by following the ope rat ing
instructions, adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician
to restore the video product to its normal operation.
E. If the video product has been dropped, or the cabinet damaged.
F. When the video product exhibits a distinct change in performance --
this indicates a need for service.
REPLACEMENT PARTS
-- When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or that have the
same characteristics as the original part. Unauthorized substitutions may result in f ire,
electric shock or other hazards.
SAFETY CHECK
-- Upon completion of any service or repairs to this video product, ask
the service technician to perform safety checks to determine that the video product is i n
proper operating condition.
FIELD INSTALLATION
-- This installation should be made by a qualified service person
and should conform to all local codes.
13.
14.
15.
16.
17.
18.
19.
