Ducting
Vissari onboard rangehoods must be installed with high quality 150mm semi rigid
ducting to achieve optimum extraction and performance noise levels.
This requires a 160mm round hole cut in the ceiling or wall.
Do not reduce ducting size.
Avoid sharp bends in the ducting route.
A short direct ducting route is optimum, avoid long ducting routes with many bends.
Avoid using flexible ducting.
Flexible ducting should only be installed as a last option, if installed ensure that it is a
short direct route to the termination point and extended tort, so no slack duct occurs.
All ducting materials and fittings are available from Vissari.
07
860mm
293mm
260mm
824mm
125mm
305mm
Total height
430mm
