10
Operating Instructions
STARTUP
Connect the power cord to a standard wall outlet. Do not use a GFCI outlet to connect the unit (see Safety
Information). After connection, you will immediately hear a short beep.
SETTING TEMPERATURE – ADJUSTABLE THERMOSTAT CONTROL
The default temperature is 43 °F (6 °C). Use the
▲
and
▼
buttons to set the desired temperature between the
range of 37 °F to 61 °F (3 °C to 16 °C).
temperature reading. The digital display reading will adjust as the unit cools. While the unit is adjusting to the new
setting, press the
▲
and
▼
buttons to view the selected temperature setting.
If there is a power outage, the unit will revert to the last temperature setting once power is restored.
LOADING BEVERAGES AND WINE BOTTLES
When loading the beverage cooler to full capacity, we recommend the following steps to effectively cool a large
number of beverages and wine bottles.
1. Use the Adjustable Thermostat Control to set
the temperature to 43 °F (6 °C) (also the default
temperature).
2. Allow the beverage cooler to cool for a minimum of
two hours.
3. Load the wine bottles. To achieve maximum capacity,
refer to the loading diagrams.
4.
temperature will rise as indicated on the display.
5. Once the beverage cooler has cooled the wine bottles
to 43 °F (6 °C), use the Adjustable Thermostat Control
to select a desired cooler internal temperature (the
lowest temperature setting is 37 °F (3 °C).
6. Allow several hours for the beverage cooler to cool to
the desired lower temperature.
NOTE:
It is normal for temperature variances to occur inside the unit, and areas near the door will have slightly
warmer temperatures.
Standard 12-Ounce Cans
The beverage cooler accommodates 126 standard 12-ounce cans. To accommodate all 126 cans, position the glass
shelves and load the beverages.
Wine Bottles
The beverage cooler accommodates a range of wine bottles, and the capacity
varies depending on the position of the shelves and width of the wine bottles.
Nest the wine bottles to gain greater capacity.
Other Beverages
The glass and wire shelves can be adjusted to accommodate varying sizes of beverage cans and bottles depending
upon storage needs.
ROW 1
7 wine bottles
ROW 2
7 wine bottles
ROW 3
7 wine bottles
ROW 4
7 wine bottles
ROW 5
5 wine bottles
ROW 6
5 wine bottles
ROW 7
5 wine bottles