background image

 4
 

Warranty

One-year ManufaCTurer defeCT WarranTy

This range hood is warranted to the original purchaser to be free of defects in material and workmanship for one (1) year from the date  
of purchase .
Our obligation shall be limited to the repair or replacement of a unit (at our discretion) that may prove, by our sole examination, to be 
defective under normal use and service during the warranty period . We may issue credit in the amount of the invoice value of the defective 
product (or a percentage of it according to use) in lieu of repair or replacement . 
Any failure of this product that is not traceable to a defect in material or workmanship is not covered by this warranty . These  
non-warrantable items include, but are not limited to: 

 

Any defects or damage to light bulbs

 

Change in colour or finish due to chemical usage

 

Improper installation not in accordance with manufacturer’s instructions

 

Dents, bumps, and scratches incurred during shipping, handling, or installation

 

Damage caused by failure to follow care and cleaning guidelines, including damage caused by the use of abrasive cleaners

 

Alterations made to the unit by the purchaser or installer

 

Damage caused by accidental impact, fire, flood, freezing, and normal wear

 

Bends and warping caused by forced connections, over-tightened fittings, and inadequate support during installation

A thorough inspection must be made before installation and any damage must be promptly reported . We will not be liable for failures or 
damage that could have been discovered or avoided by proper inspection and testing prior to installation .
Incidental repairs that would involve a minimum of time and effort on behalf of the purchaser will not be considered warranty work and no 
compensation will be deemed forthcoming .
This warranty is non-transferable and shall be voided if the unit is removed from its initial installation or if it is not installed following the 
manufacturer’s instructions .
Under no circumstance shall we be held liable for personal injury or property damage resulting from improper installation or use of this 
product . We will not be held liable for inconvenience caused by loss of use of this product, costs incurred for labour or materials, removal 
and installation of replacement units, or any other incidental or consequential damages . Costs relating to obtaining access for repair or 
replacement are the responsibility of the user . 
This warranty does not extend to commercial and institutional installation or use .

WarranTy ClaIM PrOCedure

If a claimable defect occurs, please contact our customer service team at 1-800-394-1720 (Monday–Friday, 8:30 a .m .–5 p .m ., EST) .
Before you make your claim call, please ensure that you have:

 

Description of the range hood

 

Proof of sale

 

Details regarding the defect

 

Name(s) and address(es) of the owner and installer

Claims must be filled out in writing and returned within six (6) months of the appearance of a defect . Failure to comply with this stipulation 
will make this warranty null and void . We reserve the right to a thirty-day (30) delay following the receipt of a claim in which to inspect the 
product . We assume no responsibility for labour costs, removing or replacing a previously installed product, transportation, or the return of 
a product .

Содержание 654OVSN017STS





















Отзывы: