5
Xero L P/L
Width of rear panel
606/981/1231
±0.5
Xero L P/L
638.5/1013.5/1263.5
±0.25
25.138"/39.902"/49.744"
±0.01"
23.858"/38.622"/48.465"
±0.02"
A 617.5/A 992.5/A 1242.5
24.311"/39.075"/48.917"
10.5
0.413"
10.5
0.413"
16
0.630"
16
0.
63
0"
19
0.748"
16.25
0.640"
26.3
1.03
5"
Start of slot
mm
in
a
b
c
d
e
f
g
h
49
2
27
86.5
150
ø 13
30
ø 5.6
1.929
0.079
1.063
3.406
5.906
ø 0.512
1.181
ø 0.220
b
b
c
a
a
e
d
h
b
g
f
16
0.630"
39
1.535"
2
0.0
79"
45
.5
1.791"
17.2
0.
67
7"
To
tal length (with infeed and end cap)
3000
/118" / ht
o
±
1
± 0.0
39"
1/2019 (US)
The lower end
of the profile
is marked with
“profile below”.
Assembly dimensions for 1 axis: Xero L P/L profile set electrified
Assembly dimensions / Layout
Xero Twin P/L profiles can be screwed in cabinets or on panels.
The accessories with fixed axis distance from Xero L P/L and Xero Twin P/L can be used.
Please observe the indications concerning weight loads and ensure that the substructure of the wall units/furniture and their fixtures can
support the expected loads.
With free-standing furniture, ensure that there is sufficient stability even with the intended merchandise supports.
All fastening points are to be used in event of maximum loads!
End caps must be fitted on profile with conductor rail.
Depending to your local regulations, a conduit must be used for the primary side of the driver. Check this before installation.
It must be ensured that access to the driver is possible for inspection and subsequent servicing.
