3
Qubo Wall P/L
1/2021 (US)
1 Safety
1.1 Explanation of symbols
Safety instructions are marked as follows in these
instructions.
⚠
WARNING
A safety instruction marked in this manner indi-
cates a possible dangerous situation, which if not
prevented may result in death or severe injury.
⚠
NOTE
A safety instruction marked in this manner indi-
cates a possible dangerous situation, which if not
prevented may result in damage to property and
the environment.
1.2 Intended use
The product is used exclusively for incorporating mer-
chandise supports for the presentation of goods.
Merchandise supports and electrical devices permitted
are exclusively those that conform to the specification in
these instructions.
Field of application
The product must be used exclusively in the commer-
cial field.
Personnel
These instructions describe the assembly of the product
as well as its handling and cleaning. Therefore these
instructions must be handed on to the end user after
successful assembly of the product.
The contents of the section on “Assembly” is directed at
personnel who undertake the assembly and the electrical
connection (e.g. shop fitters, licensed electricians).
The contents of the section on “Handling” is directed at
the end users (e.g. sales personnel, visual merchandisers).
⚠
WARNING
In the event of misuse, there is the danger that the
merchandise supports and the electrical devices
will be damaged. This may lead to injury and da-
mage to the product.
>
Use only approved accessories and electrical
devices.
>
Comply with the permitted connection, maxi-
mum load and equipment values.
>
Do not lean any ladders against the merchandi-
se supports.
1.3 Fundamental dangers
⚠
WARNING
>
Do not load the merchandise supports above the
maximum load capacity.
>
Do not place any receptacles, from which fluids
can escape, on the merchandise supports.
>
Keep moisture away from current conducting
components.
2 Product description
2.1 Overview
The Qubo Wall P/L is a structural shelving system, with a
high degree of design freedom, for wall structures.
Fig. 1: Qubo Wall P/L
2.2 Brief description
Qubo Wall P/L is a steel upright, with or without po-
wer tracks for electrified shelves with LED lighting, with
a 175 mm hole matrix. This allows the use of shelves with
integrated light fittings for additional illumination of the
goods on display.
The wall system can be configured by fitting connecting
tubes.
2.3 Power supply
The 24 V distributor enables power supply to a maximum
of 8 connections, each with a maximum of 2 converters of
75 W. The switched input enables the use of a switch.
120 V
L = 1500 mm
/ 59.055"
NV (24 V)
L = 500 mm
/ 19.685"
ø
7.7 mm
0.303"
Fig. 2: Converter 24 V
NOTICE! If dimmers are to be used, electronically
controlled, low-voltage dimmers must be installed!
For an overview of the electrical connection of the wall
uprights and the associated components see the section
on Electrification 3.8 on page 8
.
